banner 1

7 Tips For Using Your Ultrasonic Lab Equipment


There are some considerations you should keep in mind when using an ultrasonic lab equipment on glassware, plastic ware, and your lab instruments.Whether you are cleaning beakers,bottles, vials, pipettes, or other labware,laboratory ultrasonic cleaners eliminate the time and effort of manual scrubbing.

1.Many of your lab instruments are delicate,they are so fragile .The key is to deliver fast, thorough results without causing damage. Ultrasonic lab equipment cleaning is the perfect solution since cavitation is very gentle while cleaning the entire surface. An ultrasonic lab cleaner is very effective for cleaning lab tools, microscopy parts, embedded samples, specimen mounts, etc.

2.It should be noted that labware contaminated with biohazardous materials should be disposed of safely. In the event that it is to be cleaned, an autoclave should be employed.

3.Always wash glassware immediately after use. If this is not possible, allow the glassware to soak. There is a possibility
that if the glass is not cleaned immediately some residues will be impossible to remove. Never soak for long periods in alkaline solutions, as this will damage the glass.

4.When using an ultrasonic lab equipment, place the glassware in a basket so that the items do not come in contact with the bottom of the tank, the vibrating ultrasonic membrane. After the ultrasonic labware cleaning stage is labware finished, rinse with distilled or deionized water rather than tap water.This will ensure that your items will dry completely and without spots.

5.Certain types of cleaning chemicals such as highly alkaline detergents can lead to clouding, crazing or stress cracking of plasticware, particularly polycarbonate. Long periods of exposure to strong oxidising agents are also known to cause plastic ware to become brittle and prone to failure.For this reason, you should not use strong cleaning agents on plasticware.

6.You should also never use abrasive cleaners or scouring pads which scratch the surface of plasticware.

7.Finally, inspect the glassware to ensure that there are no cracks or chips,as this can affect future tests and samples.For ultrasonic cleaning lab plastic ware, the same rules apply as glassware. Make sure to place the items in a basket to ensure they do not touch the ultrasonic membrane and rinse with distilled or deionized water after cleaning.


An ultrasonic cleaner in your laboratory will save time and reduce effort while providing a safe solution for your cleaning needs.In fact,studies have shown that it can be up to 60 times faster while delivering thoroughly clean results. In addition,ultrasonic and small openings that can’t be cleaned manually. Cleanliness of laboratory vessels and instruments is critical, as any residue from a prior laboratory procedure may contaminate the next experiment, test, or process.